How to set your WiFiX firmware to use custom DNS servers, like openDNS, for special or filtered DNS versus the stock settings that your cell carrier may be using.
In this quick video we show you step by step how to configure the NEXP1GO router for using its PoE power via the ethernet WAN port.
When we setup our router systems for cellular connectivity, sometimes we just need the modem to do modem stuff. We may not necessarily want the system to be our router and modem and wifi access point.
We might just want the router to hush up and pass the data on to our switch or other system that we use for WiFi, or maybe we just want to feed all the “internets” into our one and only computer.
If you want to know how to turn off your routers WiFi, when using one of our WiFiX routers, then watch this quick video on just that.
Please bear with us as we work to bring more tutorial content. This page is in an easier to see format here: https://thewirelesshaven.com/wifix-nex-routers-user-manual/
Learn how to update (flash) the firmware on your NEXQ6GO router. Step by step directions with pictures from beginning to end.
How do we find the routers system size and why do we need to know what it is?
This article explains step by step how to find just that.
ticed that the picture on the front of the WG1608 routers shows the SIM insertion in a confusing way. The WG1608 Sim Tray isn’t hard to use, once you know how its setup.
This LTE FIX IT tutorial will outline the steps for building the WG3526 LTE CAT6 Router. It is provided strictly for educational purposes and should be used at your own risk. LTE…