WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems

SKU: M2MODEMCLIP
About this Item

Keep your MHF4 antenna connectors secure using this great little clip!

Works with 30mm wide cellular 4G and 5G M.2 Modules.

Not intended  for 22mm wide wifi modules.

$3.95

Description

WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems

 

The Wireless Haven WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems

 

The Wireless Haven has finally found a quality item to help keep your antenna MHF4 connectors secure to your modem. This clip will set over your antenna connectors across the entire end of your modem. It keeps slight pressure on the connectors to ensure positive connection as well as keeps the connectors off of the securing screw. This helps keep signal noise from accidentally coming in from the ground source off of the modem hold down screw.

Add one to your modem purchase to ensure your antenna pigtails have a much less chance of grounding out and getting accidentally disconnected.

The Wireless Haven WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems

 

All you need to do is place the M.2 modem connector hold down clip down over your placed antenna pigtails, then secure it in place with your normal modem hold down screw.

 

 

NOTICE:¬†These clips are 30mm wide and do NOT work with Intel type 22mm wide (22×30 form factor) M.2 wifi modules. These clips are too wide for those! We do not currently carry the clips for that particular size module.

 

 

SKU: M2MODEMCLIP Categories - ,

3 reviews for WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems

  1. Visvambhara Widmer (verified owner)

    Ordered 2 of these for EM9191 and RM502 and works great on both used supplied screws no problem. Thanks

  2. Jose De Santiago (verified owner)

    Works great, could be better.

    I used it on my “USB3.0 to NGFF M.2 5G Modem Adapter Enclosure”, however it would be nice to include a tiny screw that would fit the M.2 NGFF type of adapters. The “WiFiX Modem Connector Hold Down Clip” is intended for Routers that have an M.2 Key interface slot and not for the M.2 NGFF adapters. I had a tiny screw on hand, and it worked flawlessly.

  3. PAUL D OZZELLO (verified owner)

    great idea. poor execution. I ordered a bunch of them, only to find the supplied screw/bolt thingees are nowhere near the correct size for any of my modem installation locations or other adapters (thread is too big). wazzup with that? Should provide an assortment of sizes, if there’s no one standard. And they need to be longer as well, as the clip makes the one you used before (which is the right size/thread of course) too short…

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Questions? Comments?
  • Comment (3)
  • great idea. poor execution. I ordered a bunch of them, only to find the supplied screw/bolt thingees are nowhere near the correct size for any of my modem installation locations or other adapters (thread is too big). wazzup with that? Should provide an assortment of sizes, if there’s no one standard. And they need to be longer as well, as the clip makes the one you used before (which is the right size/thread of course) too short…

  • Works great, could be better.

    I used it on my “USB3.0 to NGFF M.2 5G Modem Adapter Enclosure”, however it would be nice to include a tiny screw that would fit the M.2 NGFF type of adapters. The “WiFiX Modem Connector Hold Down Clip” is intended for Routers that have an M.2 Key interface slot and not for the M.2 NGFF adapters. I had a tiny screw on hand, and it worked flawlessly.

Leave Your Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

In stock

1 Year Warranty: 1 Year

Warning