Cradlepoint IBR1100LP6 CAT6 KIT (With all Accessories)


This Kit includes all accessories required for an internet connection

Cradlepoint IBR1100 LP6 CAT6 Router (Multi-Carrier Firmware) Kit

The Cradlepoint IBR1100 Series is a compact, ruggedized 3G/4G LTE networking solution designed for mission-critical connectivity in the most challenging environments. Ideal for in-vehicle networks including police cars, ambulances, and mass transit, this cloud-managed solution provides organizations the ability to scale deployments quickly and manage their vehicle networks easily in real-time. With an extensive list of safety and hardening certifications, the COR IBR1100 is engineered to protect against extreme temperatures, humidity, shocks, vibrations, dust, water splash, reverse polarity, and transient voltage.

We assembled this Kit will all the accessories required for an internet connection–except an activated SIM card.  This router uses a single (or dual) standard sized (full) SIM card(s).  SIM card adapters are required when using Micro or Nano sized SIM cards.

The Cradlepoint IBR1100LP6 may also be purchased without the accessories.


  •     Supports LTE Advanced with SIM-based auto-carrier selection (LP6, LP4 versions only)
  •     Dual-modem dock for increased availability
  •     Cloud-managed
  •     Dual-band, dual concurrent WiFi (802.11 a/b/g/n/ac)
  •     Ruggedized for vibration, shock, dust, splash & humidity
  •     Ignition sensing
  •     Certified 3G/4G LTE enterprise grade internal modems
  •     Software defined radio supports multiple carriers (Gobi)
  •     Built-in transient and reverse polarity voltage protection
  •     9–36 DC voltage input range
  •     Integrated temperature sensor
  •     Active GPS support



  • Ruggedized router with integrated business-class 3G/4G modem; includes integrated mounting plate
  • Two meter locking power and GPIO cable (direct wire)
  • Quick Start Guide with warranty information

NOTE: This packaged kit also includes a 12V 2.5 Amp power supply and a 2.1mm to 4-Pin DIN power cable adapter (for indoor installations), 2 x Cradlepoint 4G LTE SMA antennas, and 2 x 2.4/5Ghz Dual Band WiFi RP-SMA antennas.  



  •     Multi-carrier 4G LTE support with dual SIM capability
  •     Supports Ethernet (T1, DSL, Cable, MetroE), WiFi as WAN, and Metro WiFi
  •     Ruggedized to ensure always-on connectivity
  •     Create real-time alerts to monitor uptime



  •     Increase speed to deployment with “zero-touch” configuration
  •     Simplify installation with built-in voltage protection and ignition sensing
  •     Flexible GPS reporting for easy integration with Automatic Vehicle Location (AVL) systems



  •     Advanced security, VPN, and stateful firewall to protect sensitive data
  •     Designed for PCI compliant network architectures
  •     Cloud-managed security and content filtering (CIPA compliant)



  • Dual-modem capable with optional IBR1100/IBR1150 Dual-Modem Dock
  • LP6: LTE Advanced LTE/HSPA+ (SIM-based Auto-Carrier Selection for all North American carriers)
  • LPE: 4G LTE/HSPA+/EVDO (multi-carrier, North America)
  • LP3: 4G LTE/HSPA+ (Europe, EMEA, and Australia/New Zealand)
  • WiFi as WAN¹
  • Failover/Failback
  • Load Balancing
  • Advanced Modem Failure Check
  • WAN Port Speed Control
  • WAN/LAN Affinity
  • IP Passthrough
  • Standby


  • VLAN 802.1Q
  • DHCP Server, Client, Relay
  • DNS and DNS Proxy
  • DynDNS
  • UPnP
  • DMZ
  • Multicast/Multicast Proxy
  • QoS (DSCP and Priority Queuing)
  • MAC Address Filtering


  • Dual-Band, Dual-Concurrent
  • 802.11 a/b/g/n/ac
  • Up to 128 connected devices (64 per channel – 2.4 GHz and 5 GHz)
  • WPA2 Enterprise (WiFi)
  • Hotspot/Captive Portal
  • SSID-based Priority
  • Client Mode (5 GHz only) for faster data offload


  • Cradlepoint NetCloud Manager²
  • Web UI, API, CLI
  • Active GPS support on all models
  • Data Usage Alerts (router and per client)
  • Advanced Troubleshooting (support)
  • Device Alerts
  • SNMP
  • SMS control
  • Serial Redirector
  • Auto APN recovery


  • IPsec Tunnel – up to 5 concurrent sessions
  • L2TP³
  • GRE Tunnel
  • Route Filters (Access Control Lists, Prefix Filters, Route Maps, Communities for BGP)
  • Per-Interface Routing
  • Routing Rules
  • Policy-based Routing
  • NAT-less Routing
  • Virtual Server/Port Forwarding
  • IPv6
  • VRRP³
  • STP³
  • NHRP³
  • VTI Tunnel support
  • OpenVPN support
  • CP Secure VPN compatible
  • Serial PAD Mode


  • RADIUS and TACACS+ support*
  • 802.1x authentication for Ethernet
  • Zscaler integration³
  • Certificate support
  • ALGs
  • MAC Address Filtering
  • Advanced Security Mode (local user management only)
  • Per-Client Web Filtering
  • IP Filtering
  • Content Filtering (basic)
  • Website Filtering
  • Zone-Based Object Firewall with host address (IP or FQDN), port, and mac address

*-Native support for authentication. Authorization and accounting support through hotspot/captive portal services.


  • Automated WAN Failover/Failback support
  • WAN Affinity and QoS allow prioritization of VoIP services
  • Advanced VPN connectivity options to HQ
  • SIP ALG and NAT to allow VoIP and UC communications to traverse firewall
  • MAC Address Filtering
  • 802.1p/q for LAN QoS segmentation and treatment of VoIP on LAN
  • Private Network support (wired and 4G WAN)
  • Cloud-based management²

1 – WiFi-related functions are only supported on IBR1100 models
2 – NetCloud Manager requires a subscription
3 – Requires an Extended Enterprise License

Weight 30 oz
Dimensions 10 × 10 × 3 in

1 review for Cradlepoint IBR1100LP6 CAT6 KIT (With all Accessories)

  1. JoshuaKemp

    Good router with strong wifi. Works well with ATT ipad plan. A no brainer to set up. Install the Sim card and power up the router and it connects to the internet. Speeds range from 30 to 100 down and 10 to 40 up depending on time of day.

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.