WE826GO-U 4G LTE WiFi Router

SKU: ROWE826GO
About this Item

Equipped with the latest WiFiX firmware preinstalled

$68.70

Description

WiFiX WE826GO-U LTE Router

The WiFiX WE826GO-U is the newest version of our WE826-T2 router and comes with our latest WiFiX version of GoldenOrb firmware preinstalled on the router.

The WE826 LTE Router is the latest generation in a class of affordable wireless communication products.  Its rugged and compact design makes the WE826 suitable for both mobile and stationary applications.  The WE826 combines stability with performance, and offers a 2.4GHz wireless transmission rate of 300M.  See our WiFi suggestions below.

The WE826GO-U is a router and requires a modem for cellular internet.  See below for different modem options.

Please refer to our Complete Build Tutorial for instructions on installing the modem and configuring the WE826.  The STEP pertaining to upgrading the WE826’s firmware should be ignored since WiFiX version of GoldenOrb is preinstalled on the WE826GO-U (out of the box).

NOTE: Cellular service providers may require activating a specific data plan to use on a cellular internet device.   The carriers are constantly updating and/or modifying existing cellular plans.   It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components.

 

Power Adapter Upgrade:

Our WiFiX WE826GO-U routers include a 2 Amp Power Adapter after determining that 1 Amp is insufficient when using the Sierra Wireless MC7455 modem under load–which may result in both WiFi and service disconnection issues.

We strongly recommend upgrading to our top quality 12V 4A (30W) power adapter when using the Sierra Wireless and/or Quectel CAT12/CAT20 modems.   The importance of providing adequate power to the router and its modem must not be underestimated.

 

ACCESSORIES:

The SIM card slot on the router uses a Standard sized SIM card, and a SIM Card Adapter Kit may be also be required.  See installation tips below to avoid damaging the SIM Card slot.

 

MODEM OPTIONS:

The WE826GO-U is equipped with a single Mini PCI-E modem slot which allows modem installation without additional hardware.

When installing a M.2 form modem into a Mini PCI-E modem slot, a Mini PCI-E to M.2 Key B adapter must be used (with or without optional SIM Card slot).

Refer to the steps at the bottom of this listing for instructions on installing a Mini PCI-E and M.2 modem.

 

Want to see our modems? Look here: Mini PCI-E Modems and here: M.2 Modems

 

The Mini PCI-E modems have U.FL antenna connector ports and require two (2) five inch U.FL to SMA Female Bulkhead pigtails to install in the NEXQ6GO-M.

The M.2 modems have MHF4 antenna connector ports and require two (2) five inch MHF4 to SMA Female Bulkhead pigtails to install in the NEXQ6GO-U.

___________________________

1. The MC7455 is not recommended for Sprint Band 41 (unless provisioned via Sprint) as it may experience random disconnects.

 

 

Cellular Antenna Upgrade:

The NEXQ6GO-U stock cellular antennas may be upgraded to any of the following cellular antennas:

 

A significant number of customers like upgrading their stock antennas with the Cisco LTE Omni Antenna Kit.

The Cisco antennas use TNC connectors (as opposed to SMA).  The NEXR5GO antenna pigtail cables must be upgraded to match that of the modem’s antenna connector ports to install the Cisco antenna upgrade:

  • The Mini PCI-E  modems (see above) require two U.FL to TNC Female Bulkhead connector pigtails, one 5 inch pigtail and one 10 inch pigtial to install the Cisco antenna kit.
  • The M.2 modems (see above) require two MHF4 to TNC Female Bulkhead connector pigtails, one 5 inch pigtail and one 10 inch pigtail to install the Cisco antenna kit.

* Note: The two existing SMA connector cutouts in the NEXR5GO router case must be enlarged/drilled to 15/32″ to accommodate the larger TNC bulkhead connectors.

 

WE826 LTE Router Tutorials:

See steps below for installing a Mini PCI-E modem in the WiFiX W826 routers.

See this LTE FIX IT tutorial for complete instructions on building and configuring the WE826 with a Mini PCI-E and/or M.2 modem.

See this LTE FIX IT tutorial for general information on building and configuring an LTE router and modem.

 

Wireless (Wi-Fi) Overview:

The WiFi supports IEEE802.11 N/G/B/A protocol with a maximum wireless rate of 300 Mbps.  It is equipped with two (2) removable RP-SMA 5dBi high gain WiFi antennas for better coverage and performance in  large areas.

Note:  The WiFi capabilities on the WE826 routers are less than optimal for providing WiFi to multiple devices.  Home installations for family/multiple users/devices, may discover the WE826 is best used strictly as the modem/gateway (to provide the internet) and connected to a quality dual band (2.4/5GHz) WiFi router or Access Point to provide the WiFi component.  The WE826 would be then be connected via an Ethernet cable from one of the LAN ports on the WE826 to the WAN port on the WiFi router or Access Point.

 

Software Overview:

Our WiFiX version of GoldenOrb (based on OpenWRT) comes pre-installed on the WE826GO-U which may be easily upgraded to other custom OpenWRT based firmware.

 

Installing a Mini PCI-E and M.2 Modem:

 

Installing a modem in the WE826GO-U is identical to installation in the WE826-T2.   Please refer to the Tutorial link provided above for instructions on configuring the router’s WiFiX firmware/software.

 

 

 

 

SIM CARD INSTALLATION AND TIPS:

It is important to insert the SIM Card into the router correctly to avoid bending and/or damaging the internal pins and spring in the router’s SIM Card Slot.

It is equally important when using a SIM Card Adapter, that the SIM Card is properly seated into the adapter to avoid damage to the SIM Card slot components.  

DISCLAIMER:  Damage to the SIM Card slot, its spring and pins, are NOT covered under warranty.

See below for proper SIM Card and Adapter preparation and installation.

 

The SIM Card installs into the NEXQ6GO with the metal surfaces facing up.  The cut corner of the SIM Card is inserted into the SIM Card Slot.

 

TIPS:

When using a SIM Card Adapter, the SIM Card MUST fit correctly into the adapter.  This will:

  • Help prevent damaging the SIM Card Slot internal components, and,
  • Help to eliminate disconnect issues that can occur when the router warms up to operating temperatures.

To assure the SIM Card is seated into the SIM Card adapter correctly, all the tits/tabs on the four sides of the SIM Card MUST be removed.  This is accomplished by laying an Emory board or fine piece of sand paper flat on a table and gently working each side of the SIM Card back and forth to sand off the tits/tabs.

The SIM Card should fit into the adapter with ease, not loose but not tight.  Otherwise, when pushed into the router, the SIM Card can tilt ever so lightly on one end (or side), causing damage to the pins in the SIM Card Slot and/or the pins not making adequate contact with the electronic contact chip.  This bad connection can worsen as the router warms up.

Check the SIM Card closely for any signs of damage.  If SIM Card is bad, worn or dirty from swapping it in and out of devices, clean the SIM Card’s electronic metal chip with an alcohol pad and refrain from touching the metal chip area during re-installation.  A pencil eraser may also be helpful to gently clean the metal contact scratches.

 

Specifications

Hardware specifications

Product number
  • WE826GO-U
Hardware
  • MT7620A
  • Flash: 16M
  • Ram: 128M
Size
  • 140 x 85 x 25mm
  • 5.5 x 3.33 x 1 inch
Interfaces
  • 1 – PCI-E slot
  • 1 – SIM card slot (Standard USIM)
  • 1 – USB 2.0 port
  • 1 – Micro SD card slot
  • 1 – 10/100M WAN port (Auto MDI/MDIX)
  • 4 – 10/100M LAN port (Auto MDI/MDIX)
Wireless
  • Working frequency:2.4GHz
  • Wireless rate:300Mbps
Ethernet

Ports

  • 1 – 10/100M WAN port (Auto MDI/MDIX)
  • 4 – 10/100M LAN port (Auto MDI/MDIX)
Indicator lights
  • PWR (power)
  • WLAN (wireless status indication)
  • SYS (system light)
  • 3G / 4G lights
  • SD light
  • USB light
Button
  • 1*Reset button
Power supply
  • DC 12V/2A
Antenna
  • 2 x removable omni-directional 5dbi Wi-Fi antennas
  • 2 x 4G LTE Antennas (U.FL pigtail connectors for modem included)
Management
  • Independent WEB page management
Use the environment
  • Operating temperature:0℃~40℃
  • Working humidity:10%~90%RH
  • Storage temperature:-40℃~70℃
  • Storage humidity:5%~90%RH

Software specifications

Wireless function
  • SSID broadcast: support
  • SSID number: 1-3 (support Chinese SSID)
  • Network Type: Guest network, employee network
  • Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK
  • Wireless MAC address filtering: support whitelist
  • VLAN settings:
  • Transmit power setting:
  • WDS function: support
  • Number of wireless clients limit: support
  • QoS
  • WMM
  • Kick out weak signal device, disable weak signal device access: support
System Management
  • Device management: English WEB management
  • System log: support
  • Restore factory settings: support
  • Backup configuration: support
  • Import configuration: support
  • Software upgrades: support
Optional system
  • WiFiX version of GoldenOrb firmware

Firmware

WiFiX Router Firmware

6 reviews for WE826GO-U 4G LTE WiFi Router

  1. Thomas G Dodd (verified owner)

    Fast shipping. Ordered on Friday and received on Monday. Router works great and was easy to get up and running with EM7455 following the tutorial on LTEhacks. website.

  2. joseph nunke

    The router comes loaded with up to date firmware, so it took 10 mins to install my Quectel EP06-A modem and I was up and running. This was a great upgrade from my LB2120.

  3. justlkn

    This router came ready to rock right of of the gate. I installed a Sierra Wireless MC7455 in it and I use it on the Verizon network. I had it up and running in 10 minutes. Nice addition to the RV. Beats having to charge a jetpack continuously!

  4. Nathan Petroski

    Great little router, the tutorials and info on this site really give you the support you need to make it work for your situation.

  5. Rippentorn

    This little router is simple and great to use. This GO version comes preloaded with firmware that’s up do date making it even more plug and play.

    Buy a mpcie modem to pop into it and your golden. There are tutorials on LTEhacks.com on how to set it all up.

    I’ve had zero issues with mine. The Wifi is only 2.4G and isn’t fantastic, but its way better than I expected (my expectations were low for the wifi)

    I put a Sierrra Wireless MC7455 in mine and use it on AT&T networks. Its perect.

  6. Preston Durieux

    Great product, easy DIY solution for your LTE needs. Everything you need is right here on the product page, takes about 30 mins to set up. Fast shipping as well!

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Questions? Comments?
  • Comment (6)
  • Great product, easy DIY solution for your LTE needs. Everything you need is right here on the product page, takes about 30 mins to set up. Fast shipping as well!

  • This little router is simple and great to use. This GO version comes preloaded with firmware that’s up do date making it even more plug and play.

    Buy a mpcie modem to pop into it and your golden. There are tutorials on LTEhacks.com on how to set it all up.

    I’ve had zero issues with mine. The Wifi is only 2.4G and isn’t fantastic, but its way better than I expected (my expectations were low for the wifi)

    I put a Sierrra Wireless MC7455 in mine and use it on AT&T networks. Its perect.

  • This router came ready to rock right of of the gate. I installed a Sierra Wireless MC7455 in it and I use it on the Verizon network. I had it up and running in 10 minutes. Nice addition to the RV. Beats having to charge a jetpack continuously!

  • The router comes loaded with up to date firmware, so it took 10 mins to install my Quectel EP06-A modem and I was up and running. This was a great upgrade from my LB2120.

  • Fast shipping. Ordered on Friday and received on Monday. Router works great and was easy to get up and running with EM7455 following the tutorial on LTEhacks. website.

Leave Your Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Out of stock

Warning