Specifications
WAN
- Dual-modem capable with optional IBR1100/IBR1150 Dual-Modem Dock
- Integrated LP6 Category 6 LTE Advanced LTE modem (with DC-HSPA+ failover) or LPE 4G LTE modem (with HSPA+/ EVDO/3G and 2G failover) or LP3 4G LTE modem (with HSPA+ and 2G failover)
- Three LAN/WAN switchable 10/100 Ethernet ports – one default WAN (cable/DSL/T1/satellite/Metro Ethernet)
- WiFi as WAN, Metro WiFi; 2×2 MIMO “N” 2.4 GHz or 5 GHz; 802.11 a/b/g/n/ac (IBR1100 only)
LAN
- Dual-band, dual-concurrent WiFi; 802.11 a/b/g/n/ac (IBR1100 only)
- Three LAN/WAN switchable 10/100 Ethernet ports – two default LAN
- Serial console support for out-of-band management of a connected device
PORTS
- Power
- 2-wire GPIO
- USB 2.0
- 3 Ethernet LAN/WAN
- 2 cellular antenna connectors (SMA)
- 1 active GPS antenna connector (SMA)
- 2 Wi-Fi antenna connectors (R-SMA)
- Serial DE-9 (commonly called “DB-9”) connector – RS-232 (Out-of-Band Management of an external device requires a null modem adapter/cable)
TEMPERATURE
- All models: −30 °C to 70 °C (−22 °F to 158 °F) ambient air operating
- All models: −40 °C to 85 °C (−40 °F to 185 °F) storage
- Includes temperature sensor with options for alerts and automatic shutoff
HUMIDITY (non-condensing)
- 5% to 95% operating
- 5% to 95% storage
POWER
- DC input steady state voltage range: 9–36 VDC (requires inline fuse for vehicle installations)
- For 9–24 VDC installations, use a 3 A fuse
- For > 24 VDC installations, use a 2.5 A fuse
- Reverse polarity and transient voltage protection per ISO 7637-2
- Ignition sensing (automatic ON and time-delay OFF)
- Power consumption:
- Idle: [email protected] (4.8W); worst [email protected] (9.6W)
- Tx/Rx: [email protected] (7.8W); worst [email protected] (15.6W)
- 12VDC 2A adapter recommended
SIZE – 5.3 in x 4.4 in x 1.4 in (134 mm x 112 mm x 35 mm)
WEIGHT – 16.1 oz (457 g)
CERTIFICATIONS
- FCC, CE, IC
- WiFi Alliance (IBR1100 only) – 802.11a/b/g/n certified, 802.11ac supported
- Safety: UL/CUL, CB Scheme, EN60950-1
- Hazardous Locations: Class I, Div. 2
- Shock/Vibration/Humidity: compliant with MIL STD 810G and SAEJ1455
- Ingress Protection: compliant with IP64 (includes protection from dust and splashing water)
- Materials: WEEE, RoHS, RoHS-2, California Prop 65
- Vehicle: E-Mark, compliant with ISO 7637-2
- Telecom: PTCRB/CTIA, GCF-CC
GPS
- GPS Protocols: TAIP and NMEA 0183 V3.0
- Satellite channels: Maximum 30 channels (16 GPS, 14 GLONASS), simultaneous tracking
- Concurrent standalone GPS, GLONASS, BeiDou and Galileo (LP6 models only)
- 1 Hz refresh rate
- Accuracy:
- < 2m: 50%
- < 5m: 90%
- Horizontal: < 2m (50%); < 5m (90%)
- Altitude: < 4m (50%); < 8m (90%)
- Velocity: < 0.2 m/s
- Acquisition:
- Hot start: 1 second
- Warm start: 29 seconds
- Cold start: 32 seconds
- Sensitivity
- Tracking: −160 dBm (tracking sensitivity is the lowest GNSS signal level for which the device can still detect an in-view satellite 50% of the time when in sequential tracking mode)
- Acquisition (standalone): −145 dBm (acquisition sensitivity is the lowest GNSS signal level for which the device can still detect an in-view satellite 50% of the time)
- Operational limits: altitude < 6000 m or velocity < 100 m/s (either limit may be exceeded, but not both)
Reviews
There are no reviews yet.