48V to 5V 3A POE+ Gigabit Splitter – USB-C Tip

About this Item

Perfect for PoE powering devices that use USB-C 5VDC power input.

From: $25.48

Description

[vc_row][vc_column][vc_column_text]Our 48V to 5V 3A POE+ Gigabit Splitter with USB Type C Power Plug receives data and power over a single Cat7/Cat6A/Cat6/Cat5e Ethernet cable and splits the power and the data into two output cables (i.e, the USB Type C provides 5 volt DC 3 Amps of power to the device, and the RJ45 Ethernet cable to provide the data).  This will allow a non-PoE, 5 volt, device to be remotely installed and powered over the Ethernet cable (PoE).

If you are looking for a 48V to 5V PoE Splitter with a 2.1mm round barrel plug for power, you can find it HERE.

The Splitter requires a 40V to 56 Volt PoE (power adapter) Gigabit Injector that combines (injects) the Dc power and the data into a single ethernet cable and sends it to the splitter.  A 48V PoE power injector is typically used and may be installed within 100M of the Splitter.

The PoE Splitter supports Mode A (Pins 1,2 + 3,6-) and B (7,8 + 4,5-) for both IEEE 802.3af /802.3at standard protocol for supplying DC power.

802.3af (PoE) can deliver up to 15.4 watts per port over network cables with 12.95W assured to be available at the powered device.

802.3at (PoE+) can deliver up to 30 watts over network cables with 25.5 watts available to the receiving devices.  For this reason, PoE Plus is also known as High PoE.

The unit’s data rate of Gigabit 10/100/1000 (GbE) transfer supports an ultra-fast maximum data rate of 1 Gigabit per second (Gbps – 1000 Mbps) and does not affect the speed performance of the local area network and devices.

The Splitter is equipped with a standardized USB type C power plug which is compatible with numerous modern devices.

 

SPECIFICATIONS:

PoE Protocol IEEE 802.3af/802.3at
Input Voltage DC: 40V to 56V
Output Current DC: 5V 3 Amp
Transfer Efficiency >95%
Pin Support 1236/4578 Power
Working Temperature -20~80 ℃
Power Plug USB Type C

 

Check out how our customers are using this splitter to be able to install their Nighthawk outdoors in a weatherproof enclosure, like our Medium PCB Enclosure.

The video example uses our older type 5V PoE Splitter, found here. This listing is for our new type that works the exact same but does not need the USB-C adapter.

[/vc_column_text][vc_video link=”https://player.vimeo.com/video/645347199″ align=”center” title=”NightHawk MR1100 PoE Power Setup”][/vc_column][/vc_row]

Reviews

There are no reviews yet.

Be the first to review “48V to 5V 3A POE+ Gigabit Splitter – USB-C Tip”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Questions? Comments?

Leave Your Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

POE Injector Desktop Adapter 48V 1.5A 72W Gigabit

High quality Gigabit PoE Injectors.

Power Cable 5 foot 3 Prong Grounded to C13 Style

Compatible with our 'Desktop Style' PoE injectors

1 Year Warranty: 1 Year

Warning