PoE Outdoor Enclosure Bundle for Bring your own 4G 5G Hotspot Modem and Router – 4×4 MIMO – MHF4
About this Item
Fully enclose your router hotspot for use outdoors, and for use with outdoor antennas.
Requires assembly by customer.
The Wireless Haven’s PoE Outdoor Enclosure Bundle for Bring your own 4G 5G Hotspot Modem and Router is all you need to assemble a complete functioning outdoor 4×4 MIMO router and modem enclosure using your own Router and Modem, or a selection from ours. Complete with all the parts to get it completely built and functioning, just add your own router and modem and an activated data SIM**.
This bundled system is built for connecting to outdoor high powered antennas, like our High Beam X2 antennas.
This bundle system can work with all of our store router bundles, the MOFI4500 and MOFI5500 routers, GLinet, Cradlepoint, Peplink, Netgear LBR20, and more.
NOTICE: Some routers will require additional parts to make work 100%. In order to reduce the base cost of this bundle we will offer those parts as options, when the parts are available to us.
The Wireless Haven has put together this complete router enclosure bundle with all the necessary parts for you to assemble an outdoor safe 4G/LTE/5G cellular gateway hotspot router, taking the guesswork out of parts purchasing. We match all the parts exactly as we like to build them ourselves, as well as from favorite builds by our community over at https://wirelessjoint.com.
NOTICE: The antennas and antenna cables do not come with the stock bundle, they are optional items that can be added to the bundle.
For full details of each individual product in this bundle, please see their individual listing pages below:
WiFiX Medium Router PCB Enclosure Kit
WiFiX Outdoor Enclosure SIM Card Slot Extender – Nano to Nano
MHF4 Female Right Angle to N Female Bulkhead Straight (1.13mm Cable) 10 in (25cm)
Qty 2 x PCB Thermal Heat Transfer Pads (30mm x 30mm x 6mm) – 2 Pack
48V 72W PoE++ rated PoE Power Injector
48V to 12V 3A POE+ Gigabit Splitter – 5.5mm X 2.1mm Power Plug Tip
Misc Parts for installation included
Heat Shrink Tubing
Zip Tie Mounts and Zip Ties for securing miscellaneous parts
High Beam X2 High Powered Outdoor Antennas
LMR200 5 foot Duplex Antenna Cables
Qty 4 x U.FL Female PCB to SMA Male Right Angle Adapter Pigtail – For use with routers that only have an SMA female connector versus direct to modem connectors.
Copper Heatsink for 5G Modems – 4mm – Low Clearance – HIGHLY RECOMMEND YOU GET THIS OR ONE OF YOUR OWN. Modems like these do NOT do well without heat dissipation.
Power Cable 5 foot 3 Prong Grounded to C13 Style
5 In 1 SIM Card Adapter Kit With Emery Sanding Board
PSK Lightning Arrester Type N Male to Type N Female Bulkhead
Check out our full selection of Antenna Cabling
NOTE: This is a bundle of individual parts that the customer must assemble and configure themselves. If you would like it to be assembled for you, we offer this as an additional service. Add the Router Build Assembly and Configuration Service Level 3 item to your cart by checking the box next to it, on the item options to the right of this description.
** PLEASE NOTICE: Cellular service providers may require activating a specific hotspot data plan to use on a cellular internet device. The carriers are constantly updating and/or modifying existing cellular plans. It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components.
** NOTE: Amazon links may be affiliate links
2.1 x 5.5 MM to 2.5 x 5.5 MM Power Connector Adapter for TMHI Nokia GatewayRated 0 out of 5$2.95
WiFiX NEXP1GO Gigabit Wireless Internet WiFi RouterRated 0 out of 5
WiFiX Mini Router PCB Enclosure KitRated 0 out of 5$37.95
POE Desktop Adapter 24V 1.5A 36W 100MRated 0 out of 5$20.95
WiFiX Small Router PCB Enclosure KitRated 0 out of 5$42.99