Outdoor Enclosure Bundle with Gigabit PoE Router and Quectel EM160R-GL
About this Item
Router, 4×4 MIMO LTE Cellular Modem, Outdoor Enclosure, and all needed parts in one kit.
Requires assembly by customer, unless our build service is added.
The Wireless Haven’s Outdoor Enclosure Bundle with Gigabit PoE Router and Quectel EM160R-GL is all you need to assemble a complete functioning outdoor 4×4 MIMO router and modem enclosure combination with our WiFiX NEXP1GO Gigabit PoE Router and the Quectel Wireless EM160R-GL high speed cellular LTE modem. Complete with all the parts to get it completely built and functioning, just add your activated data SIM**.
The Wireless Haven has put together this complete router enclosure bundle with all the necessary parts for you to assemble an outdoor safe 4G/LTE cellular gateway router, taking the guesswork out of parts purchasing. We match all the parts exactly as we like to build them ourselves, as well as from favorite builds by our community over at https://wirelessjoint.com.
NOTICE: The main photo shows the routers wifi omni-directional antennas mounted inside the enclosure. These mounts are “3M Zip Tie Mounts” and are included in the bundle. If you want to purchase more of them, we do not currently offer them from our store.
For full details of each individual product in this bundle, please see their individual listing pages below:
NEXP1GO Gigabit PoE Cellular Router
Quectel EM160R-GL CAT16 M.2 Modem
Mini-PCIe to M.2 (NGFF) Key B 4G 5G Modem Adapter
Qty 4 x MHF4 Female Right Angle to N Female Bulkhead Straight (0.81mm Cable) 12 in (35cm)
Qty 2 x PCB Thermal Heat Transfer Pads (30mm x 30mm x 6mm) – 2 Pack
WiFiX Medium Router PCB Enclosure Kit
WiFiX Outdoor Enclosure SIM Card Slot Extender – Micro to Mini
48V 72W PoE++ rated PoE Power Injector
Copper Heatsink for 5G Modems – 4mm – Low Clearance – HIGHLY RECOMMEND YOU GET THIS OR ONE OF YOUR OWN. Modems like these do NOT do well without heat dissipation.
Power Cable 5 foot 3 Prong Grounded to C13 Style
5 In 1 SIM Card Adapter Kit With Emery Sanding Board
PSK Lightning Arrester Type N Male to Type N Female Bulkhead
Router Build Assembly and Configuration Service Level 3
NOTE: This is a bundle of individual parts that the customer must assemble and configure themselves. If you would like it to be assembled for you, we offer this as an additional service. Add the Router Build Assembly and Configuration Service Level 3 item to your cart by checking the box next to it, on the item options to the right of this description.
** PLEASE NOTICE: Cellular service providers may require activating a specific hotspot data plan to use on a cellular internet device. The carriers are constantly updating and/or modifying existing cellular plans. It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components.
* NOTE: The EM160R-GL modem does NOT support mmWave antennas nor bands, nor 5G “New Radio” bands. It is a category 16 modem and supports LTE bands and WCDMA bands. Please check the EM160R-GL listing page for full details.
NEXR5GO Cellular Router (PoE) with Dual Band (2.4GHz & 5.8GHz) WiFiRated 0 out of 5From: $89.00
Power Cable 5 foot 3 Prong Grounded to C13 StyleRated 0 out of 5$6.35
WiFiX NEXP1GO Router – With Parts Kit for M.2 Modems – 4G and 5GRated 0 out of 5From:
USB3.1 Type C Male to 2.1 MM x 5.5 MM Connector AdapterRated 0 out of 5$7.95
PoE Outdoor Enclosure Bundle for Bring your own 4G 5G Hotspot Modem and Router – 4×4 MIMO – MHF4Rated 0 out of 5From: $202.19