NOTE: This is a bundle of all items to be able to use the RM502Q-AE modem with devices via USB3 output.
All items included and optional for the bundle are listed at the bottom of this page.
Assembly Video: https://www.youtube.com/watch?v=v0TDl-oLuEs
The Quectel Wireless RM502Q-AE 5G NR Sub-6 GHz Modem Module is an M.2 modem module that provides 5G NR (New Radio), LTE-Advanced, and GNSS connectivity for routers, notebooks, Ultrabooks, tablet computers, and M2M applications over many radio frequency bands.
Here is an excerpt from the Quectel Wireless Website:
The RM502Q-AE is a 5G sub-6GHz M.2 module measuring 52.0mm × 30.0mm × 2.3mm which supports both standalone (SA) and non-standalone (NSA) modes, as well as LTE Cat 20. The module achieves maximum downlink rates of 2Gbps and uplink rates of 450Mbps under SA mode and maximum downlink rates of 5Gbps and uplink rates of 650Mbps under NSA mode. The RM502Q-AE is intended to meet the demand for high speed, eMBB, and low latency of customers anywhere in the world outside China.
The module supports multiple-input multiple-output (MIMO) technology which greatly reduces errors and optimizes data speed, and optionally features integrated GNSS (GPS/GLONASS/BeiDou/Galileo) for rapid and precise positioning. It is suitable for a wide range of applications including industrial routers, industrial PDAs, rugged tablet PCs and digital signage.
- Supports both NSA and SA modes
- Supports MIMO
- USB 3.1 / PCIe 3.0 high speed interface
- Multi-constellation GNSS receiver available
NOTE: This is a M.2 form card and requires MHF4 Pigtails. In order to use this card in a cellular hotspot router, or with a computer system, with a Mini PCI-E slot, a mPCIe to M.2 Adapter must be used. Please know that not all M.2 adapters will work with the longer style 5G modems and routers. Our USB3 modem enclosure adapter does.
NOTE: Caution should be exercised when updating the modem firmware. It is recommended to use a Linux machine for the updates, though Windows firmware update files are regularly available. We will not accept return of a modem that has been bricked or otherwise altered or damaged.
We offer the firmware update as an add-on for Quectel Wireless Modems, this is available on this product page as an add on option.
IMPORTANT: Exercise extreme caution while installing MHF4 connectors to the modem antenna ports. The ports are delicate and easily damaged. Assure that the MHF4 connector is perfectly centered, level and aligned with the modem port. The MFH4 connector will then snap into place using minimum pressure. Do not apply excessive force. A damaged modem connector port is not covered under warranty. If you do accidentally damage a modem port, we offer a repair service: Modem Antenna Port Replacement Service
IMPORTANT: It is strongly recommended to invest in a quality power strip surge protector (i.e., APC, Belkin,…) to use behind a router and/or electronic equipment. This will help protect against Transients (momentary spikes/surges in voltage or current) that can be detrimental to expensive equipment. Transient damage to modems are not covered under warranty. Protect your equipment.
QUICK SPECS:
- 5G sub-6GHz module
- 52.0mm × 30.0mm × 2.3mm
- 8.4g
- M.2 form factor
- Max. downlink 2.5Gbps / 900Mbps uplink
- Extended temperature range of -40°C to +85°C
For full details and specifications, see more on the Quectel Wireless website: https://www.quectel.com/product/5g-rm502q-ae/
Bundled Items
Quectel RM502Q-AE 5G Cellular Modem
WiFiX Modem Connector Hold Down Clip for M.2 Style 4G 5G Modems
Copper Heatsink for 5G Modems – 4mm – Low Clearance
USB3.0 to NGFF M.2 Key B 4G 5G Modem Adapter Enclosure with SIM Card Slot – New Style
Qty 2 x MHF4 Female (Right Angle) to SMA Female Bulkhead (Straight) 5 inch (13cm) 1.13mm Pigtail Cable (The USB3.0 Enclosure already has 2, these two make a total of 4)
12V 2A 24W Power Adapter (2.1mm Tip)
Optional Items
Copper Heatsink for 5G Modems – 4mm – Low Clearance – Highly Recommended to have a heatsink
Aluminum Heatsinks for 5G Modems – 5mm – Low Clearance – Highly Recommended to have a heatsink
600-3800MHz Cellular Omni-Directional Paddle Antennas (SMA Connectors) PAIR
Modem Adapter Enclosure Assembly
Reviews
There are no reviews yet.