PoE Outdoor Enclosure Bundle for WiFiX PoE Routers – 4×4 MIMO
About this Item
Fully enclose your router hotspot for use outdoors, and for use with outdoor antennas.
Requires assembly by customer.
The Wireless Haven’s PoE Outdoor Enclosure Bundle for WiFiX PoE Routers – 4×4 MIMO is all you need to assemble a complete functioning outdoor 4×4 MIMO router and modem enclosure using our WiFiX Gigabit PoE Routers. Complete with all the parts to get it completely built and functioning, just add your router and modem and an activated data SIM**.
Choose modems here: Wireless Haven High Speed Modems
This bundle system can work with all of our store router bundles, as well as MOFI4500 and MOFI5500 routers, GLinet, Cradlepoint, Peplink, Netgear LBR20, and more.
NOTICE: Some routers will require additional parts to make work 100%. In order to reduce the base cost of this bundle we will offer those parts as options, when the parts are available to us.
The Wireless Haven has put together this complete router enclosure bundle with all the necessary parts for you to assemble an outdoor safe 4G/LTE/5G cellular gateway hotspot router, taking the guesswork out of parts purchasing. We match all the parts exactly as we like to build them ourselves, as well as from favorite builds by our community over at https://wirelessjoint.com.
NOTICE: A router, high powered antennas, and antenna cables do not come with the stock bundle, they are optional items that can be added to the bundle.
For full details of each individual product in this bundle, please see their individual listing pages below:
WiFiX Medium Router PCB Enclosure Kit
WiFiX Outdoor Enclosure SIM Card Slot Extender – Nano to Nano
Qty 4 x U.FL Female (Right Angle) to N Type Female Bulkhead (Straight) 12 inch (30cm) RG178 (1.78mm) Pigtail Cable
Qty 4 x MHF4 to U.FL Pigtail Adapter for M.2 Modem Connectors
Qty 2 x PCB Thermal Heat Transfer Pads (30mm x 30mm x 6mm) – 2 Pack
48V 72W PoE++ rated PoE Power Injector
Misc Parts for installation included
Heat Shrink Tubing
Zip Tie Mounts and Zip Ties for securing miscellaneous parts
WiFiX NEXP1GO Gigabit Wireless Internet WiFi Router
WiFiX NEXS2GO 4G 5G Ready Router with Dual Band (2.4GHz-5GHz) WiFi
600-3800MHz WiFi – Cellular 7dBi Directional MIMO Antenna (± 45°) N Female Connectors
4×4 MIMO Antenna 600-3800MHz Cellular 8dBi Directional (± 45°) N Female Connectors
LMR200 5 foot Duplex Antenna Cables
Qty 4 x U.FL Female PCB to SMA Male Right Angle Adapter Pigtail – For use with routers that only have an SMA female connector versus direct to modem connectors.
Copper Heatsink for 5G Modems – 4mm – Low Clearance – HIGHLY RECOMMEND YOU GET THIS OR ONE OF YOUR OWN. Modems like these do NOT do well without heat dissipation.
Power Cable 5 foot 3 Prong Grounded to C13 Style
5 In 1 SIM Card Adapter Kit With Emery Sanding Board
PSK Lightning Arrester Type N Male to Type N Female Bulkhead
Check out our full selection of Antenna Cabling
NOTE: This is a bundle of individual parts that the customer must assemble and configure themselves. If you would like it to be assembled for you, we may offer this as an additional service.
** PLEASE NOTICE: Cellular service providers may require activating a specific hotspot data plan to use on a cellular internet device. The carriers are constantly updating and/or modifying existing cellular plans. It is the customer’s sole responsibility to assure a compatible cellular plan is available prior to purchasing cellular related components.
** NOTE: Amazon links may be affiliate links
PoE Outdoor Enclosure Bundle for Bring your own 4G 5G Hotspot Modem and Router – 2×2 MIMORated 0 out of 5From: $200.11
WiFiX NEXP1GO Gigabit Wireless Internet WiFi RouterRated 0 out of 5
USB3.1 Type C Male to 2.1 MM x 5.5 MM Connector AdapterRated 0 out of 5$7.95
POE Desktop Adapter 12V 3 Amp 36W 100MRated 0 out of 5$24.76
Ubiquiti POE Desktop Adapter 24V 0.5A 12W 100MRated 0 out of 5$8.99