WiSecure Antenna Mounting System
About this Item
Solid, weatherproof, and accurate articulating antenna mounting system.
The WiSecure antenna mounting system is engineered to couple stability and attractiveness in one product. Its design is made of a special fiberglass reinforced polyamide plastic, which is super rigid–even in extreme weather conditions. Its innovative design and composite makeup, compared to metal brackets, offers better performance and a rust free life-time. WiSecure further enables the antenna position and aligning in two separate polarization settings.
NOTICE: These are generally purchased to replace a damaged WiSecure mount for one of our WiFiX outdoor antennas. Check to make sure you need one for your antenna, if you are not replacing a broken one. These generally do not break very easily, and isn’t common to need one. All WiFiX antennas that use these mounts come with one already included with the antenna, as well as the enclosure assemblies from WiFiX, when noted on the listing. These can be used as a mount for other antennas and enclosures if you need them.
The WiSecure antenna mounting system is made from very solid material with high content of fiberglass, which makes it much more durable than standard steel bracket or magnesium cast, which is susceptible to cracking.
This solution enables mast mounting (diameters up to 2-1/2″, minimum 1″) and wall mounting (the distance between the mounting holes is 2-11/16″, center to center). Our mounting system consists of three parts that enable the adjustment in two planes. The adjustment is possible through the range of 70 degrees (35+35). This helps the user easily set antenna alignment, which simultaneously ensuring the full durability and constant strength of the mounting system. To make the antenna pointing more accurate, a visible angle scale is added onto the moving parts of the WiSecure mount. The WiSecure antenna mounting system is scalable, which means that you can increase the adjustment range by adding WiSecure elements one to another. The DC ground of your antenna system is secured by our mounting bracket (there is a grounding wire included through the mount).
Our WiSecure antenna mounting systems are perfect for mounting a number of items that can be adapted to the WiSecure mount base, but it is specially designed for all of our WiFix ip67 weather secure flat panel directional antennas
NOTE: This listing is for the articulating mount and U-bolt hardware for mounting to a post or mast. The hardware (bolts and washers typically) to attach this mount base to our antennas is not included in this listing. That hardware is only included with the actual antennas. If you need the bolts to attach the antennas, you will have to source them from your local hardware store or an online hardware retailer.
PCB Thermal Heat Transfer Pads (30mm x 30mm x 6mm) – 2 PackRated 0 out of 5$4.95
RJ45 Waterproof IP67 Bulkhead Connector with Ethernet and 2.1MM Jumper CableRated 0 out of 5$16.47
Copper Heatsink for 5G Modems – 4mm – Low ClearanceRated 5.00 out of 5$10.99
700-2700MHz Cellular 3-5dBi PCB Flat Antenna: TS-9 ConnectorRated 0 out of 5$14.30
WiFiX Outdoor Enclosure SIM Card Slot Extender – Micro to MiniRated 0 out of 5$16.85