450-2700MHz Radome 4G LTE Ultra Wide Band Omni-Directional Antenna (Vertical Polarity) with N Type Female Connector
The Omni-directional antenna is suitable for both intercity and rural area installations, as well as for RV’s and marine applications.
We recommend sealing the antenna connectors with dielectric grease and self-bonding silicon tape, when installing any outdoor antenna and cabling.
It’s Omni-directional design eliminates the need of aiming the antenna towards the cellular tower. It’s 360 degree beam is better suited for applications where trees or other obstructions may interfere or scatter a tower cellular signal.
The radome is constructed from a durable PVC weatherproof casing and engineered to accommodate the 2G/3G/4G/LTE bands and frequencies for the vast majority of carriers. The antenna should be mounted in the upright position for optimal results.
Two antennas mounted parallel to one another may be used for applications requiring MIMO configurations.
The antenna includes brackets and hardware for mounting on a mask (pole), a flat horizontal surface or to a wall.
|Horizontal Beam width||360°|
|Vertical Beam width||18°|
|Lightning Protection||DC Grounded|
|Maximum Input Power||100W|
|Antenna Radome Material||PVC|
|Diameter of Installation Pole||Ø1.18 in to Ø1.97 in
Ø30mm to Ø50mm
|Dimensions (diameter x length)||2.48 in x 18.94 in
63mm x 481mm
|Weight||2.205 lbs /1 kg / 35.3 oz|
|Operating Temperature||-104°F to 158°F (-40℃ to+70℃)
|Rated wind velocity(m/s)||134 mph