High Beam X2 – HIGH POWER 15dBi 2×2 MIMO Cellular 5G 4G LTE Directional Antenna 600-2700MHz (+45°/-45°) N Female Connectors

About this Item

High Power Wide Band Multi-Carrier Cellular 5G 4G LTE 2×2 MIMO Flat Panel Directional Antenna

Included mounting hardware for Pole/Mast sizes up to 2″

Great for multiple line of sight scenarios

From: $155.00

Description

The High Beam X2 Wide Band 600-2700MHz HIGH POWER 15dBi 2x MIMO Cellular 5G 4G LTE Directional Antenna is compatible with the vast majority of carrier bands and frequencies, making it suitable for most 5G / 4G / LTE applications.  This is a very High Power hotspot Antenna. The antennas backplane is equipped with dual  N Type Female Connectors. We recommend sealing the antenna connectors with dielectric grease and self-bonding silicon tape, when installing any outdoor antenna and cabling.

The customer favorite is back, and now in a 2×2 MIMO version. This antenna design has long been a favorite of our customers, with its high signal gain, and simple flat panel directional antenna design. This antenna is a powerful directional antenna, yet much more forgiving to aim than other types of directional antennas.

Supports – 3G / 4G / 5GNR – Bands: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 11 / 12 / 13 / 14 / 17/  18 / 19 / 20 / 21 / 25 / 26 / 28 / 29 / 30 / 32 / 34 / 38 / 39 / 40 / 41 / 66 / 71

NOTICE: We have recently had our High Beam antennas tested for gain in the 600-700MHz range, because we have been testing these antennas on T-mobiles band B71. We didn’t feel ethical stating the High Beam antennas could be used for B71/n71 on the official product listing until we received tests that show that it can be and at what signal gain. Now we have the tests and here is the full Gain Chart (01/22/2022):

High Beam X2 - HIGH POWER 15dBi 2x2 MIMO Cellular 5G 4G LTE Directional Antenna 600-2700MHz (+45°-45°) N Female Connectors-GainChart-2022
High Beam X2 – HIGH POWER 15dBi 2×2 MIMO Cellular 5G 4G LTE Directional Antenna 600-2700MHz (+45°-45°) N Female Connectors-GainChart-2022

The 600-700MHz range maxes out at about just over 8dBi.

 

Our High Power Hotspot Antenna’s polarity is +45/-45 and its mount is designed to accommodate different installations. The adjustable angle mounting system allows the antenna to be easily configured for installations requiring different positioning to match your individual cellular towers antenna polarity.

700-2700MHz HIGH POWER 15dBi 2x MIMO Cellular 5G 4G LTE Directional Antenna (+45-45) N Female Connector 2
High Beam X2 Mounting Hardware

 


4×4 MIMO Mounting Example (J-Pole Sold Separately)

 

The High Beam X2 Includes (Not Including Add-Ons):
(1) 2×2 MIMO Antenna, with 2 – N Type Connectors
Adjustable Mounting Kit ( For Pole/Mast sizes up to 2″ )
Clamp and Hardware

This is a very high power antenna for cellular hotspots, routers, or direct to modem use.

We offer 45 degree antenna connectors, that work perfect with this antenna, here: Type NF to Type NM Right Angle Cable Connector

We also carry this in a slightly smaller body SISO version, the High Beam

Specifications

Input resistance 50 Ohm
Maximum input power 10 W
Connector N-Female
Permissible wind load 67 MPH
Operating temperature range -40 ° С to +50 °
Max permissible humidity of air 100%
Mounting type Mask, Pole
Execution type Directional
Dimensions (L x W x H) 240 x 240 x 60 mm
9.45 x 9.45 x 2.36 in
Weight with bracket 1.2kg  /42 oz./ 2.65lb
Gross weight 1.4 kg / 49 oz / 3.09 lbs

Gain Chart  (Updated 01-2022)

High Beam X2 - HIGH POWER 15dBi 2x2 MIMO Cellular 5G 4G LTE Directional Antenna 600-2700MHz (+45°-45°) N Female Connectors-GainChart-2022
High Beam X2 – HIGH POWER 15dBi 2×2 MIMO Cellular 5G 4G LTE Directional Antenna 600-2700MHz (+45°-45°) N Female Connectors-GainChart-2022

 

Specs Sheet:
HighBeamX2-SpecSheet-WirelessHaven-Final

Installation Tips

When installing two of these antennas for a 4×4 MIMO configuration, optimal spacing is to space them about 2 feet apart, and rotate them in opposing polarity orientation, Like so:

NOTICE: This image has been updated to reflect our antenna manufacturers corrections for the most optimal installation of two antennas (Feb 2022)

The Wireless Haven High beam X2 4x4 MIMO Configuration Example

 

2 reviews for High Beam X2 – HIGH POWER 15dBi 2×2 MIMO Cellular 5G 4G LTE Directional Antenna 600-2700MHz (+45°/-45°) N Female Connectors

  1. brianalexanderhill (verified owner)

    Great price and db rating compared to other reputable options. It works great to take an almost nonexistent signal that actually bounces off the hill across from us (we’re in a valley) and gives us 8/1mbps.

  2. Charles (verified owner)

    So far it has doubled my speeds from 60mb/s to 120mb/s down and 20mb/s up (which may be carrier limited since it always tests out to just over 20mb/s uplink). The Wilson yagi pair typically gave 40-60mb/s down and 10-12mb/s up at this location at their best. This antenna right now is in the attic floor pointed in the general direction of the cell tower and is showing -70dbm on 1900mhz link, probably 10-15dbm better then the the prior Wilson Yagis (rated for 10dbi gain). Cell Tower is 3.1 miles away without a clear line of site (moutain ridge just barely cuts off true line of site by about 30 ft) as well as heavily wooded area (not to mention my roof). I haven’t experimented in which direction the polarization works best right now its 90 degree polarization relative to vertical. Without high gain antennas, the router drops to the 700mhz bands and will rarely connect on the higher speed LTE bands for very long if at all. Its been 8 hours and its still hanging onto 1900mhz which is probably the fasted band in my area for the provider.

Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Questions? Comments?
  • Comment (2)
  • So far it has doubled my speeds from 60mb/s to 120mb/s down and 20mb/s up (which may be carrier limited since it always tests out to just over 20mb/s uplink). The Wilson yagi pair typically gave 40-60mb/s down and 10-12mb/s up at this location at their best. This antenna right now is in the attic floor pointed in the general direction of the cell tower and is showing -70dbm on 1900mhz link, probably 10-15dbm better then the the prior Wilson Yagis (rated for 10dbi gain). Cell Tower is 3.1 miles away without a clear line of site (moutain ridge just barely cuts off true line of site by about 30 ft) as well as heavily wooded area (not to mention my roof). I haven’t experimented in which direction the polarization works best right now its 90 degree polarization relative to vertical. Without high gain antennas, the router drops to the 700mhz bands and will rarely connect on the higher speed LTE bands for very long if at all. Its been 8 hours and its still hanging onto 1900mhz which is probably the fasted band in my area for the provider.

  • Great price and db rating compared to other reputable options. It works great to take an almost nonexistent signal that actually bounces off the hill across from us (we’re in a valley) and gives us 8/1mbps.

Leave Your Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Type N Female to Type N Male Right Angle Adapter × 2

Add a set of these to make cable installation simpler and sleeker.

SMA Right Angle Adapter (PAIR)

Converts SMA Female on both ends. Plug SMA Male into another SMA Male with this adapter.

PSK Lightning Arrester Type N Male to Type N Female Bulkhead × 2

Protect expensive equipment from lighting strikes.
Click to add a set to your order.

36" Solid Steel J-Pole Style Antenna Mount Kit - Made in the USA

Longer than standard for multiple antennas, and Made in the USA.

Lifetime warranty included.

90 Day Warranty: 90 Days

Out of stock

Warning